<ul id="ekyag"></ul>
<fieldset id="ekyag"></fieldset>
Edwards Diffstak 160/700M Vapour Diffusion Vacuum Pump - NEW The compact water-cooled Diffstak pumps with an integral cooled baffle offer exceptionally clean pumping with very low backstreaming, reduced outgassing, and a reduction in the number of elastomer seals required for installation. The Edwards Diffstak 160 (ISO-160 inlet) design has been proven over many years with thousands of pumps installed. This pump has a manually operated high vacuum isolation valve and is supplied with: NW-25 elbow, NW-25 centering-ring, NW-25 clamp, water pipe couplings and ferrules, inlet ISO-160 Co-Seal. Pumping speed N2 700 l/s H2 1,300 l/s Min. backing pump displacement 12 m3h-1 Recommended backing pumping RV12 Recommended fluid Santovac 5 Fluid charge (dry) 255 ml Inlet ISO-160 Exhaust NW-25 Cooling water connection 10 mm compression fittings Heater power 1.35 kW Minimum cooling-water flow at 20°C 115 l/s Weight 26 kg Edwards Diffstak 160/700M Vapour Diffusion Vacuum Pump - NEW B34831976 / B348-31-976 110-125V single-phase 50/60Hz B34831977 / B348-31-977 210-225V 1-phase 50/60Hz B34831978 / B348-31-978 230-250V 1-phase 50/60Hz
Edwards Diffstak 160/700M Vapour Diffusion Vacuum Pump - NEW
The compact water-cooled Diffstak pumps with an integral cooled baffle offer exceptionally clean pumping with very low backstreaming, reduced outgassing, and a reduction in the number of elastomer seals required for installation. The Edwards Diffstak 160 (ISO-160 inlet) design has been proven over many years with thousands of pumps installed. This pump has a manually operated high vacuum isolation valve and is supplied with: NW-25 elbow, NW-25 centering-ring, NW-25 clamp, water pipe couplings and ferrules, inlet ISO-160 Co-Seal.
Edwards Diffstak 160/700M Vapour Diffusion Vacuum Pump - NEW B34831976 / B348-31-976 110-125V single-phase 50/60Hz B34831977 / B348-31-977 210-225V 1-phase 50/60Hz B34831978 / B348-31-978 230-250V 1-phase 50/60Hz
滬公網(wǎng)安備 31011702004251號
